General

Over the years Merus has solved innumerable problems in water-bearing installations and systems. The oscillation patterns (software) which have been developed by Merus especially for this task do the job of altering the physical properties of the substances contained in the water, but the chemical composition of the water remains unchanged. Negative technical effects caused by water are reduced or stopped altogether by Merus. The way Merus acts is always the same. Merus modifies the physical properties of corrosion causing molecules to the effect that lime and other salts do not crystallize like they would normally do, oxygen does not react with iron to rust, but both stay dissolved in the water and are flushed out of the system with the water.

Here on this page we confine ourselves to listing the most common problems. We are confronted with these problems worldwide time and again in a very similar manner. The following applications are solved reproducible and sustainable by Merus (In thousands of companies the results are measured or recorded periodically and success has simply been amazing)

Why Conventional Methods are temporary and not cost effective ?

In any industrial or commercial environment water is carried from one location to another for a variety of operational reasons.  In such systems, corrosion via rust or scaling (lime scale) is a major concern which can result in expensive downtime and replacement costs.   

All conventional technologies on the market, whether chemicals or physical, produce results only at the point of installation. Once the water has passed this point, these conventional methods of treatment can no longer control the water. In the case of physical devices, the changes undergone by lime scale are not stable, but rather they convert to the previous state after a while. Physical methods have, if at all, only an indirect effect on corrosion or microbiology. If chemicals are used, those added degrade quickly. Technically, it’s impossible that the necessary concentration of the chemicals spreads uniformly in the whole system. The factors and circumstances described above, together with the long periods of time, the water remains in less used parts of the system, can frequently lead to suboptimal results or even to the failure or malfunctioning of conventional methods.

Cost of chemicals to control corrosion can be saved using Merus USA technology. Corporations use chemicals worth thousands of dollars. This periodic usage can be very expensive. Replacement of costly parts like pumps and pipes can mean extra bugetary expenses not to mention down time, high costs of labor and loss or profitability. 

Merus USA^® uses a Proprietary, High-Tech Oscillition Technology to  

      Prevent & Remove Corrosion Build up Without the use of Chemicals.        

          We have harnessed the power of science at a sub-atomic level!

See Video Presentation of Merus USA® (English)
See Video Presentation of Merus USA® (Spanish)

See Merus USA Technical Data Sheet (.PDF Required)
See Real Application Data (.PDF Required)



Other applications, involving process-related corrosion (for instance due to acids) or scale are not covered here. We are glad to answer your questions via EMAIL.